Induced Magnetism & Electrical Method Of Magnetisation



Induced Magnetism

Magnetic induction represents a fundamental method for converting magnetic materials such as steel and iron into magnets. Specifically, it refers to the process of imparting magnetism to an ordinary piece of magnetic material, essentially turning it into a magnet through external influence.

Process of Magnetic Induction

The process of magnetic induction involves several key steps:

  1. Proximity to a Strong Magnet: The magnetic material, typically soft iron, is placed near a strong magnet without direct contact. This proximity is crucial for the induction process.
  2. Creation of an Induced Magnet: The soft iron bar becomes magnetized, with the end closest to the strong magnet adopting a polarity opposite to that of the magnet itself. This induced polarity causes the iron bar to be attracted to, and thus attach to, the permanent magnet.
  3. Temporary Nature of Induced Magnetism: The magnetism induced in the soft iron bar is not permanent. Once the permanent magnet is removed, the induced magnet generally loses its magnetism. This temporary nature highlights the difference between induced magnets and permanent magnets.
    • Materials like iron, which can be magnetized easily but lose their magnetism quickly, are classified as soft. In contrast, substances like steel, which require more effort to magnetize than iron but retain their magnetism, are categorized as hard. Each type serves specific purposes; extremely hard materials are employed in the production of permanent magnets.
    • There are step-by-step guides to highlight the different method to create a temporary magnet vs a permanent magnet.

Step-By-Step Guide To Creating An Induced Magnet With A Strong Magnet

This guide focus on demonstrating how to induce magnetism in a soft iron bar using a permanent strong magnet, a common experiment in physics to illustrate magnetic induction principles.

Materials Needed

  • A strong permanent magnet (e.g., a neodymium magnet)
  • A soft iron bar or a nail (a material that can be easily magnetized and demagnetized)
  • Non-magnetic support (such as a plastic or wooden stand) to hold the magnet and iron bar
  • Compass (optional, for demonstrating the magnetic field direction)

Step 1: Prepare Your Materials

Gather all the necessary materials and ensure that the soft iron bar or nail is clean and free from any magnetic materials or previous magnetization. Set up your non-magnetic support so that you can easily bring the iron bar close to the magnet without direct physical contact.

Step 2: Examine the Natural State of the Iron Bar

(Optional) Use a compass to test the natural magnetic state of the iron bar. Move the compass along the length of the iron bar and observe any changes in the compass needle’s direction. A non-magnetized bar should not cause significant deflection of the compass needle.

Step 3: Position the Iron Bar Near the Strong Magnet

Carefully place the iron bar on the non-magnetic support so that one end is close to, but not touching, one of the poles of the strong magnet. The proximity should be close enough to allow the magnetic field of the strong magnet to interact with the iron bar without direct contact.

Step 4: Observe the Induction Process

As the iron bar comes within the influence of the strong magnet’s magnetic field, it becomes an induced magnet itself. The end of the iron bar nearest to the magnet will develop a magnetic polarity opposite to that of the facing pole of the magnet. For example, if the north pole of the magnet is nearest to the bar, the nearest end of the bar will become a south pole, attracting the north pole of the magnet.

Step 5: Test the Induced Magnetism

(Optional) Use a compass to observe the induced magnetic field in the iron bar. Move the compass along the length of the bar, and note how the needle deflects, indicating the presence of a magnetic field. This demonstrates the bar’s temporary magnetization.

Step 6: Remove the Magnet and Observe

Carefully remove the strong magnet from the proximity of the iron bar. Observe how the iron bar reacts. Typically, the iron bar will lose its induced magnetism over time, returning to its non-magnetized state. This can be verified by using the compass again, as in Step 2.

Step 7: Conclusion and Cleanup

Conclude the experiment by discussing the temporary nature of induced magnetism and the importance of continuous magnetic influence for maintaining magnetization. Safely store the magnet and iron bar, ensuring they are separated to avoid accidental magnetization or demagnetization.

Step-by-Step Guide To Creating A Permanent Magnet With A Strong Magnet

Creating a permanent magnet using a strong magnet involves magnetizing a ferromagnetic material so that it retains its magnetism over time. Here’s a step-by-step guide to help you through the process:

Materials Needed

  • A strong permanent magnet (like a neodymium magnet)
  • A ferromagnetic material to be magnetized (such as an iron nail or a steel bar)
  • Protective gloves (optional, but recommended for handling strong magnets)
  • Safety goggles (to protect your eyes)

Step 1: Safety First

  • Wear protective gloves to avoid pinching injuries when handling strong magnets.
  • Wear safety goggles to protect your eyes from any small, sharp ferromagnetic particles that might be attracted to the magnet and fly towards your face.

Step 2: Prepare the Material

  • Choose a ferromagnetic material. Iron, nickel, and cobalt are common choices. For beginners, an iron nail or a small steel bar works well.
  • Make sure the material is clean and free of any rust or coatings, as these can inhibit magnetization.

Step 3: Align the Material

  • Align the material in the Earth’s magnetic field direction (North-South). This step is optional but can help enhance the material’s magnetic properties by aligning its domains in the direction of the Earth’s magnetic field.

Step 4: Stroke the Material with the Strong Magnet

  • Hold your ferromagnetic material firmly in one hand (or place it securely on a non-magnetic surface).
  • Take the strong magnet in your other hand. Identify the magnet’s North and South poles.
  • Place one pole of the strong magnet at one end of the ferromagnetic material.
  • With steady pressure, slide the magnet along the length of the material, from one end to the other. Lift the magnet away from the material once you reach the end.
  • Repeat this process 10-20 times, always moving in the same direction. This helps to align the magnetic domains in the material, magnetizing it.

Step 5: Test the Magnetization

  • To check if your material has been magnetized, try to pick up small metal objects like paper clips or nails with it. If the objects stick, your material has become a permanent magnet.
  • If the magnetization is weak, repeat Step 4, ensuring you’re applying consistent pressure and direction with each stroke.

Step 6: Store Your New Magnet Properly

  • Keep your newly magnetized material away from electronic devices, credit cards, and other magnets to preserve its magnetic strength.
  • To maintain its magnetism, store it in a way that minimizes demagnetization risks, such as keeping it away from high temperatures and storing it with its opposite poles adjacent to those of another magnet.

Tips for Success

  • The stronger the magnet used in the magnetizing process, the more effective the magnetization of the ferromagnetic material will be.
  • Consistency in the direction of stroking is crucial for aligning as many magnetic domains as possible.
  • Some materials may not hold magnetization well due to their composition or the presence of impurities.

Electrical Method For Magnetization

Beyond proximity to a magnet, magnetization can also be achieved through electrical methods, involving the use of a solenoid—a long, insulated wire coiled into a cylinder shape.

  1. Solenoid as a Magnetizing Agent: When a direct current flows through the solenoid, it generates a magnetic field. This field is uniform in strength and direction within the coil, effectively turning the solenoid itself into a magnet.
  2. Magnetization of Steel Bars: Placing a steel bar inside the coil for a short duration allows it to become magnetized through magnetic induction. The direction of the current flow determines the polarities of the resulting magnet.
  3. Advantages of Electrical Magnetization: This method of magnetization is capable of producing magnets that are significantly more powerful than those created through other methods, such as simple stroking with a permanent magnet.

Step-by-Step Guide to Demonstrating Magnetic Induction with a Solenoid

Materials Needed

  • Insulated copper wire (enough to wrap several coils around the solenoid)
  • A solenoid (a cylindrical coil of wire)
  • A soft iron core (such as an iron nail or rod that fits inside the solenoid)
  • A power source (a battery or variable power supply)
  • An ammeter (to measure current)
  • A small magnetic compass or magnetic field sensor

Step 1: Prepare the Solenoid

Wrap the insulated copper wire evenly around the cylindrical form to create a solenoid. Ensure the coils are tightly wound and cover a significant portion of the length of the form. The ends of the wire should be left free to connect to your power source.

Step 2: Connect the Solenoid to the Power Source

Attach the ends of the copper wire to the power source. If you’re using a variable power supply, start at a low setting to avoid overheating the wire. An ammeter can be included in the circuit to monitor the current flowing through the solenoid.

Step 3: Test the Solenoid’s Magnetic Field

Turn on the power source and bring a compass close to the solenoid. Observe how the compass needle aligns with the magnetic field generated by the electric current in the solenoid. The needle should align parallel to the solenoid, indicating the direction of the magnetic field.

Step 4: Insert the Soft Iron Core

Turn off the power source temporarily and insert the soft iron core into the center of the solenoid. This core will concentrate the magnetic field, making it stronger.

Step 5: Observe the Effect of the Soft Iron Core

Turn the power back on and observe the effect on the compass or magnetic field sensor. The presence of the soft iron core should significantly increase the magnetic field strength, as indicated by a more pronounced alignment of the compass needle or a higher reading on the magnetic field sensor.

Step 6: Vary the Electrical Current

Adjust the current supplied to the solenoid using the variable power supply. As you increase the current, observe the change in the magnetic field strength. The magnetic field should become stronger with higher currents, as evidenced by the behavior of the compass or sensor readings.

Step 7: Explore the Effects of Coil Density and Iron Core Removal

Experiment with different configurations, such as increasing or decreasing the number of coils per unit length on the solenoid, or removing the soft iron core to observe the changes in magnetic field strength. These variations will further demonstrate the principles of magnetic induction and how different factors influence the magnetic field.

Step 8: Conclusion and Cleanup

Conclude the experiment by discussing the principles of electromagnetic induction demonstrated through the solenoid and the effects of various modifications, such as the introduction of a soft iron core and changes in electrical current. Safely disconnect and store all components, ensuring the power source is turned off and the materials are properly handled to avoid damage or injury.

Comparison: Electromagnet vs. Permanent Magnet

Understanding the differences between electromagnets and permanent magnets is crucial:

  • Electromagnet: Constructed from a coil of wire, often wrapped around a soft iron core, electromagnets require an electric current to sustain their magnetic field. They are characterized by their temporary magnetism and are widely used in applications such as telephone receivers, electric relays, and circuit breakers.
  • Permanent Magnet: Made from hard magnetic materials like steel, permanent magnets retain their magnetic field without the need for an electric current. They find applications in magnetic door stops, compasses, and motors, among others.
ElectromagnetPermanent Magnet
Made of a coil of wire (often with a soft iron core)Made of hard magnetic material like steel
Magnetism is temporary. Requires a current through the coil to sustain the magnetic field strengthMagnetism is permanent. Does not require any electric current to retain magnetic field strength
Applications: Telephone receivers, electric relays, electric bells, circuit breakersApplications: Magnetic doorstops, compasses, motors

This comparison highlights the distinct characteristics and applications of electromagnets and permanent magnets, emphasizing the versatility and importance of magnetic materials in various technological and industrial contexts.


Worked Examples

Question 1: Analyzing Induced Magnetism

A soft iron bar is placed near a strong permanent magnet, and it becomes magnetized. Explain why the end of the iron bar closest to the north pole of the permanent magnet becomes a south pole. What principle of magnetic induction is demonstrated through this phenomenon?

Click here to show/hide answer

This occurs due to the principle that opposite magnetic poles attract. When the soft iron bar is placed near the strong permanent magnet, the magnetic field of the permanent magnet induces a magnetic field in the iron bar. The end of the iron bar closest to the north pole of the magnet becomes a south pole because this arrangement allows for the magnetic fields of the iron bar and the permanent magnet to align in such a way that they attract each other. This demonstrates the principle of magnetic induction, where an external magnetic field can induce another magnetic field in a magnetic material, resulting in the material itself becoming a magnet with poles opposite to those of the inducing magnet.

Question 2: Temporary vs. Permanent Magnetism

After removing the permanent magnet from the proximity of the induced soft iron bar, the bar quickly loses its magnetism. Contrast this with a steel bar that has been magnetized using the same permanent magnet. Why does the steel bar retain its magnetism longer than the soft iron bar?

Click here to show/hide answer

The difference in the retention of magnetism between the soft iron bar and the steel bar can be attributed to the materials’ magnetic properties. Soft iron is a material that can be easily magnetized but also loses its magnetism quickly once the external magnetic field is removed. This is because soft iron has low coercivity, meaning it does not retain induced magnetic fields well. On the other hand, steel, which is a harder magnetic material, has higher coercivity, allowing it to retain magnetism for a longer period even after the external magnetic field is removed. This property makes steel suitable for creating permanent magnets.

Question 3: Effect of Electrical Current in Magnetization

Describe how using a solenoid with an electrical current can magnetize a steel bar more effectively than a simple close proximity to a permanent magnet. What advantages does this method have?

Click here to show/hide answer

Magnetizing a steel bar using a solenoid involves passing an electrical current through the coil, which generates a uniform and strong magnetic field within the solenoid. When a steel bar is placed inside this magnetic field, the aligned and concentrated field lines induce a strong and uniform magnetization in the bar. This method is more effective than simply placing the bar near a permanent magnet because the magnetic field generated by the solenoid can be more intense and uniform, leading to a stronger and more evenly distributed magnetization. Additionally, the direction and strength of the magnetic field can be easily controlled by adjusting the current, allowing for precise manipulation of the magnetization process. This method also enables the magnetization of materials that may require a stronger magnetic field to become magnetized.

Question 4: Exploring Magnetic Fields with a Compass

In an experiment to demonstrate induced magnetism, a compass is used to observe the magnetic field around a newly induced magnet. Explain how the compass needle’s behavior would change as it is moved from one end of the induced soft iron bar to the other, and why.

Click here to show/hide answer

As the compass is moved along the length of the induced soft iron bar, the needle will deflect, indicating the presence of a magnetic field. Starting from the end of the bar that was closest to the permanent magnet, the needle will point away from this end, indicating it is the south pole (assuming the north pole of the permanent magnet was used for induction). As the compass moves towards the middle of the bar, the deflection decreases, indicating the weakening of the magnetic field strength at the center. Moving towards the other end of the bar, the compass needle will start pointing towards the bar, indicating this end is the north pole (opposite to the induced pole). This behavior demonstrates the induced magnetic field’s direction and the temporary magnet’s polarity, illustrating the principles of magnetic induction and magnetic field distribution.

Question 5: Principles of Magnetization and Demagnetization

Discuss the implications of the temporary nature of induced magnetism for practical applications. How does the ability to easily magnetize and demagnetize materials like soft iron benefit technological or industrial processes?

Click here to show/hide answer

The temporary nature of induced magnetism in materials like soft iron is crucial for applications requiring controllable and reversible magnetism. For example, in electrical relays and transformers, the ability to quickly magnetize and demagnetize soft iron cores allows for efficient control of electrical circuits and the transformation of electrical energy. This property is also beneficial in telecommunication devices, such as telephone receivers, where varying magnetic fields can be used to convert electrical signals into sound and vice versa. The ease of magnetization and demagnetization facilitates dynamic and efficient operation in these technologies, enabling precise control over magnetic fields for various industrial, technological, and scientific applications.


Back To Magnetism & Electromagnetism (O Level Physics)

Back To O Level Physics Topic List



Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.



Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.