UY1: Capacitors And Capacitance



Any two conductors separated by an insulator (or a vacuum) form a capacitor. A capacitor is a device that stores electric charge and electric potential energy.

The electric field at any point in the region between the conductors

$$E \propto Q$$

Hence, the potential difference between the conductors:

$$V_{ab} \propto Q$$

The capacitance of the capacitor:

$$C = \frac{Q}{V_{ab}}$$

C is the proportionality constant between Q and V.

In general, the value of the capacitance depends only on the shapes and sizes of the conductors, and on the nature of the insulating material between them – independent of Q and $V_{ab}$.

The greater the capacitance C of a capacitor, the greater the magnitude Q of charge on either conductor for a given potential difference $V_{ab}$ and hence the greater the amount of stored energy.

Capacitance is a measure of the ability of a capacitor to store energy.

The SI unit of capacitance is farad (F).

$$1 \, F \equiv 1 \, C \, V^{-1} \equiv 1 \, C^{2} \, J^{-1} \equiv 1 \, C^{2} \, N^{-1} \, m^{-1}$$

Note that $\epsilon_{0} \approx 8.854 \times 10^{-12} \, C^{2} \, N^{-1} \, m^{-2} = 8.854 \times 10^{-12} \, F \, m^{-1}$

 


 

Parallel-plate capacitor in vacuum

This consists of two parallel conducting plates, each with area A, separated by a distance d that is small in comparison with their dimension. From previous analysis of parallel conducting plates, we know that:

$$\begin{aligned} E &= \frac{\sigma}{\epsilon_{0}} \\ &= \frac{Q}{\epsilon_{0} A} \end{aligned}$$

$$\begin{aligned} V_{ab} &= E d  \\ &= \frac{Qd}{\epsilon_{0} A} \end{aligned}$$

Hence,

$$\begin{aligned} C &= \frac{Q}{V_{ab}} \\ &= \frac{\epsilon_{0} A}{d} \end{aligned}$$

C for a parallel plate capacitor depends only on the geometry of the capacitor.

Small note: You might have realised that the electric field is slightly wrong as that expression is derived for the case of infinite parallel conducting plates. Hence, there is the condition – distance d that is small in comparison with their dimension, such that the electric field approximates that for the infinite case. Notice that for finite parallel conducting plates, there will be fringing of electric field at the sides of the plates.

 

Next: Capacitors In Series And In Parallel

Previous: Using Gauss’s Law For Common Charge Distributions

Back To Electromagnetism (UY1)

 

 

Back To University Year 1 Physics Notes



Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.



Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.