UY1: Convective Heat Transfer



In this part, we will look at an example to facilitate understanding of convective heat transfer.

Consider a situation where the air in a room is at a temperature of $25^{\circ}\text{C}$, and the outside air is at $-15^{\circ}\text{C}$. What is the rate of heat transfer per unit area through a 2 mm thick glass window pane of thermal conductivity $k = 2.5 \times 10^{-3} \, \text{cal} .\text{s}^{-1} .\text{cm}^{-2} .^{\circ}C^{-1}$?

Analysis of problem:

At steady state, the rates of heat transfer by convection in the room, conduction through the glass and convection in the outside air are all the same.

Let $\text{T}_{1}$ be the temperature of the surface of the glass window pane facing outside and $\text{T}_{2}$ be the temperature of the surface of the glass window pane facing the room.

Hence,

$$\Delta T_{2} = 25 – T_{2}$$

$$\Delta T_{1} = T_{1} + 15$$

Note: $h_{1}$ and $h_{2}$ is the convection coefficient of the glass window pane facing outside and the room respectively. L is the thickness of the glass window pane.

Rate of heat transfer by convection in the room = $h_{2}A \Delta T_{2}$

Rate of heat transfer by convection outside = $h_{1} A \Delta T_{1}$

Rate of heat transfer by conduction through the glass:

$$\begin{aligned} &= \frac{kA \left( T_{2} – T_{1} \right)}{L} \\ &= kA \frac{\left(40 – \Delta T_{2} – \Delta T_{1} \right)}{L} \end{aligned}$$

At steady state, the three rates are all equal.

$$h_{2}A \Delta T_{2} = h_{1} A \Delta T_{1} = kA \frac{\left(40 – \Delta T_{2} – \Delta T_{1} \right)}{L}$$

This 3 way equality in the steady state gives 2 independent equations, with which one can solve for the two unknowns $\Delta T_{1}$ and $\Delta T_{2}$ in principle. Once $\Delta T_{1}$ and $\Delta T_{2}$ have been determined, the rate of energy transfer can be calculated.

Typically, the convection coefficient are proportional to $\left(\Delta T \right)^{\frac{1}{2}}$. This means that $h_{1}$ and $h_{2}$ are proportional to $\left(\Delta T_{1} \right)^{\frac{1}{2}}$ and $\left(\Delta T_{2} \right)^{\frac{1}{2}}$ respectively. Therefore, the solutions can only be determined numerically.

As a first approximation in the solution of the problem, we can assume that the $\Delta T_{1} = \Delta T_{2} = 20^{\circ}C$ (In other words, $T_{2} = T_{1} = 5^{\circ}C$). This means that conduction is much more efficient than convection for transferring heat. (Which seems like a reasonable approximation) The convection coefficient on the inside and outside of the window pane are then given by: (Using $h = 0.0424 \times 10^{-4} \left(\Delta T \right)^{\frac{1}{4}} \, \text{cal}. \text{s}^{-1} .\text{cm}^{-1} .^{\circ}C^{-1}$)

$$\begin{aligned} h &= 0.0424 \times 10^{-4} \left( 20 \right)^{\frac{1}{4}} \\ &= 0.897 \times 10^{-5} \, \text{cal} .\text{s}^{-1} .\text{cm}^{-2} .^{\circ}C^{-1} \end{aligned}$$

The rate of heat transfer per unit area is thus:

$$\begin{aligned} h \Delta T_{1} &= 0.897 \times 10^{-5} \times 20 \\ &= 17.9 \times 10^{-5} \, \text{cal} .\text{s}^{-1} .\text{cm}^{-2} \end{aligned}$$

Heat transfer is typically limited by convection which is far less efficient than conduction.

 

Next: Radiation

Previous: Convection

Back To Thermodynamics (UY1)


Back To Thermodynamics (University Year 1 Physics)

Back To University Year 1 Physics Notes



Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.



Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.