UY1: L-C Circuit



LC Circuit

We shall look at an important circuit – one containing an inductor and a capacitor.

From Kirchhoff’s loop rule,

$$\begin{aligned} -L\frac{di}{dt} &=\frac{q}{C} \\ L\frac{di}{dt} + \frac{q}{C} &= 0 \\ \frac{d^{2}q}{dt^{2}} + \frac{1}{LC}q &= 0 \end{aligned}$$

Solving the differential equation above, will give:

$$\begin{aligned} q &= Q \cos{\left( \omega t + \phi \right)} \\ i &=-\omega Q \sin{\left( \omega t + \phi \right)} \end{aligned}$$

where the angular frequency, $\omega = \sqrt{\frac{1}{LC}}$.

The constants Q and $\phi$ are determined by the initial conditions.

Recall that the electric field energy in the capacitor is given by $\frac{q^{2}}{2C}$, which is:

$$\frac{q^{2}}{2C} = \frac{Q^{2}}{2C} \cos^{2}{\left( \omega t + \phi \right)}$$

The L-C circuit is a conservative system – the total energy in the L-C circuit is constant. Let’s calculate the energy stored in the inductor at any time:

$$\begin{aligned} \frac{Q^{2}}{2C}-\frac{q^{2}}{2C} &= \frac{Q^{2}}{2C} \left[ 1-\cos^{2}{\left( \omega t + \phi \right)} \right] \\ &= \frac{Q^{2}}{2C} \sin^{2}{\left( \omega t + \phi \right)} \\ &= \frac{1}{2} L \omega^{2} Q^{2} \sin^{2}{\left( \omega t + \phi \right)} \\ &= \frac{1}{2} L i^{2} \end{aligned}$$

This is the magnetic-field energy in the inductor at any time. The total energy oscillates between the electric and magnetic forms.

Step-by-step process in a L-C circuit

  1. Capacitor has maximum charge so no current flows.
  2. Capacitor discharges, current flows counter-clockwise and increases.
  3. The capacitor has zero charge. Current is at its maximum value and flows counter-clockwise
  4. Capacitor charges with opposite polarity. Current flow counter-clockwise and decreases.
  5. Capacitor has maximum charge so no current flows.
  6. Capacitor discharges, current flows clockwise and increases.
  7. Capacitor has zero charge. Current is at maximum value and flows clockwise.
  8. Capacitor charges with original polarity. Current flows clockwise and decreases.

In an oscillating L-C circuit, energy is transferred between magnetic energy in the inductor $\left( U_{B} \right)$ and electric energy in the capacitor $\left( U_{E} \right)$ – electrical oscillation.

The oscillating L-C circuit is very similar to a mass-spring system which undergoes simple harmonic motion. In the table below, we shall compare the oscillation of a mass-spring system with electrical oscillation in an L-C circuit.

 

Mass-Spring SystemInductor-Capacitor Circuit
 Kinetic energy = $\frac{1}{2} mv^{2}_{x}$Magnetic energy = $\frac{1}{2} L i^{2}$
 Potential energy = $\frac{1}{2} k x^{2}$Electric energy = $\frac{q^{2}}{2C}$
 $\frac{1}{2} mv_{x}^{2} + \frac{1}{2} kx^{2} = \frac{1}{2} kA^{2}$$\frac{1}{2} Li^{2} + \frac{q^{2}}{2C} = \frac{Q^{2}}{2C}$
 $v_{x} = \pm \sqrt{\frac{k}{m}} \sqrt{A^{2} – x^{2}}$$i = \pm \sqrt{\frac{1}{LC}}\sqrt{Q^{2}-q^{2}} $
 $v_{x} = \frac{dx}{dt}$ $i = \frac{dq}{dt}$
$\omega = \sqrt{\frac{k}{m}}$$\omega = \sqrt{\frac{1}{LC}}$
 $x = A \cos{\left(\omega t + \phi \right)}$ $q = Q \cos{\left(\omega t + \phi \right)}$

 

Next: Magnetic-Field Energy In Inductor

Previous: Self-Inductance & Inductors

Back To Electromagnetism (UY1)



Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.



Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.