UY1: Sphere On An Incline



sphere on an incline

The figure above shows a sphere rolling down an incline. We will analyze this rolling motion.

Important facts about accelerated rolling motion:

  • Accelerated rolling motion is possible only if a frictional force is present.
  • There is no loss of mechanical energy because the contact point (of the sphere with the ramp) is at rest at any instance.

From the energy conservation equation (Note that $v_{\text{CM}}$ is the velocity of the centre of mass of the sphere at the bottom of the incline.) and using $v_{\text{CM}} = R \omega$, we have:

$$\begin{aligned} E_{\text{kinetic}} = \frac{1}{2} I_{\text{CM}} \omega^{2} + \frac{1}{2} M v_{\text{CM}}^{2} &= Mgh \\ I_{\text{CM}} \frac{v_{\text{CM}}^{2}}{MR^{2}} + v_{\text{CM}}^{2} &= 2gh \\ v_{\text{CM}} &= \sqrt{\frac{2gh}{1 + \frac{I_{\text{CM}}}{MR^{2}}}} \end{aligned}$$

Now, let’s find the acceleration of the centre of mass of the sphere. There are a few methods to do it.

Method 1: Using Energy Conservation Equation

Using the $v_{\text{CM}}$ found above:

We know that the moment of inertia for a solid sphere is $I_{\text{CM}} = \frac{2}{5} MR^{2}$.

Hence,

$$v_{\text{CM}} = \sqrt{\frac{10}{7}gh}$$

For 1D motion with constant acceleration, we have: $v_{\text{CM}}^{2} = 2a_{\text{CM}} x$.

Hence, with $v_{\text{CM}} = \sqrt{\frac{10}{7}gh}$ and $x = \frac{h}{\sin{\theta}}$,

$$a_{\text{CM}} = \frac{5}{7}g \sin{\theta}$$

Method 2: Sum Of Forces

forces on sphere on incline

From the figure above,

$$\begin{aligned} \sum F_{x} &= Mg \sin{\theta}-f = Ma_{CM} \\ \sum F_{y} &= n-Mg \cos{\theta} = 0 \end{aligned}$$

Let’s calculate the frictional force. The torque about the centre of mass due to the frictional force is given by:

$$\tau_{\text{CM}} = fR$$

Since $\tau_{\text{CM}} = I_{\text{CM}}\alpha$ and $a_{\text{CM}} = R \alpha$, we have:

$$\begin{aligned} f &= I_{\text{CM}} \frac{\alpha}{R} \\ &= I_{\text{CM}} \frac{a_{\text{CM}}}{R^{2}} \\ &= \frac{2}{5} MR^{2} \frac{a_{\text{CM}}}{R^{2}} \\ &= \frac{2}{5} M a_{\text{CM}} \end{aligned}$$

We can substitute the expression for the frictional force into the $\sum F_{x}$ equation. Hence, we have:

$$\begin{aligned} Mg \sin{\theta}-\frac{2}{5} M a_{\text{CM}} &= Ma_{\text{CM}} \\ a_{\text{CM}} &= \frac{5}{7} g \sin{\theta} \end{aligned}$$

Done.

Method 3: Torque Only

forces on sphere on incline

Let the point of the sphere in contact with the ramp be point P. Consider the torque about point P:

$$\begin{aligned} \tau_{p} &= I_{p} \alpha \\ MgR \sin{\theta} &= \left( I_{\text{CM}} + MD^{2} \right) \alpha \end{aligned}$$

Since $a_{\text{CM}} = R \alpha$ and using moment of inertia of a sphere and parallel axis theorem, we have:

$$\begin{aligned} MgR \sin{\theta} &= \left( \frac{2}{5} MR^{2} + MR^{2} \right) \frac{a_{\text{CM}}}{R} \\ Mg \sin{\theta} &= \frac{7}{5} M a_{\text{CM}} \\ a_{\text{CM}} &= \frac{5}{7} g \sin{\theta} \end{aligned}$$

Next: More About Rolling Motion

Previous: Rolling Motion

Back To Mechanics (UY1)



Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.



Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.