# O Level Physics Formula List

This post contains all the important formulas that you need for GCE O Level Physics. (Equivalent to American High School Diploma) If you do not recognise any of the formulas listed here, you should go review the respective topic. For definitions, please visit All Definitions Needed For O Level.

## Measurements

$$\text{Reading without zero error} = \text{Reading Obtained}-\text{Zero Error}$$

## Kinematics

Average Speed, $s = \frac{\Delta d}{\Delta t}$, d is distance travelled

Average Velocity, $v = \frac{\Delta x}{\Delta t}$, x is displacement

Acceleration, $a = \frac{\Delta v}{\Delta t}$

$v = u + at$

$x = ut + \frac{1}{2} a t^{2}$

$v^{2} = u^{2} + 2 ax$

$s = \frac{1}{2} \left( u + v \right) t$

$v_{free \, fall} = \sqrt{2 gh}$

If a car is driving around a circle at a constant speed, its velocity is not constant! The car is accelerating! Why? Because velocity is a vector (has both magnitude and direction). When the car is travelling around the circle, its direction is changing constantly.

## Forces and Turning effect of Force

Newton’s First Law: A body continues to stay in its state of rest or uniform motion in a straight line as long as there is no net force acting on the body.

Newton’s Second Law: The acceleration of an object is directly proportional to the net force acting on it and inversely proportional to its mass.

Newton’s Third Law: For every force object A acts on object B, object B will exert an equal and opposite force on object A giving rise to reaction force.

$M = Fd$, M = moment, d = perpendicular dist. from force to pivot

Principle of moment: sum of anti-clockwise moment = sum of clockwise moment. $\rightarrow$ rotational equilibrium.

## Mass, Weight & Density

$w = mg$

$\rho = \frac{m}{V}$

## Pressure

$P = \frac{F}{A}$

$P_{fluid} = h \rho g$

Hydraulic press: $\frac{F_{1}}{A_{1}} = \frac{F_{2}}{A_{2}}$

Boyles’ law: $P_{1}V_{1} = P_{2}V_{2}$

## Work, Energy & Power

$W = Fd$

$P = \frac{W}{t} = Fv$

$E_{k} = \frac{1}{2} m v^{2}$

$E_{g} = mgh$, g = 9.81 $m \, s^{-2}$

Conservation of energy: Initial energy = final energy

## Thermal Physics

$PV \propto T$

$P_{1}V_{1} = P_{2} V_{2}$

$E = m c \Delta T$

$E_{fusion} = m L_{fusion}$

$E_{vap.} = m L_{vap.}$

Temperature can be measured using the following methods:

• Expansion of fixed mass of liquid
• Changes in resistance of a piece of metal
• Expansion of gas at constant pressure

Why is there constant temperature during melting?

• During melting, heat energy is used to weaken the attraction between the solid particles and not used to increase the kinetic energy of the particles.

When a thermometer is placed into hot water, why does the reading drops first then increase?

• The glass bulb expands before the mercury expands.

• Black surface
• Rough surface

## Waves, Reflection & Refraction of light, Converging lens, Electromagnetic Spectrum, Sound

$v = f \lambda$

$f = \frac{1}{T}$

Law of reflection: $\theta_{i} = \theta_{r}$

Snell’s Law: $n_{1} \sin{\theta_{1}} = n_{2} \sin{\theta_{2}}$

Refractive index: $n = \frac{c}{v}$

Denser to less dense medium: Light ray bends away from normal

Less dense to denser medium: Bends towards normal

$$1 < n \left( \lambda_{\text{red}} \right) < n \left( \lambda_{\text{green}} \right) < n \left( \lambda_{\text{blue}} \right)$$

Critical angle: $\sin{\theta_{c}} = \frac{n_{2}}{n_{1}}$, $n_{2}$ is smaller than $n_{1}$

Magnification: $M = \frac{h_{i}}{h_{o}} = \frac{d_{i}}{d_{o}}$

Note:

• An image that is real is always inverted!
• An image that is virtual is always upright!

When a water wave moves from deep to shallow,

• wavelength become shorter
• Frequency remains the same (Freq. of water wave only depends on SOURCE)
• Speed becomes slower

Factors that affect speed of sound

• Temperature – Higher temperature = higher speed of sound
• Medium – The denser the medium, the higher the speed of sound
• Humidity – Sound travels faster in higher humidity conditions

Characteristics of Image formed on plane mirror

• Same size
• Laterally inverted
• Image is virtual

## Electricity and D.C. Circuits

$\epsilon = \frac{W}{Q}$

$V = \frac{W}{Q}$

$I = \frac{Q}{t}$

$R = \frac{V}{I}$ (IMPT: It’s ratio, NOT gradient)

$R = \frac{\rho L}{A}$

Series: $R_{total} = R_{1} + R_{2} + …$

Parallel: $\frac{1}{R_{total}} = \frac{1}{R_{1}} + \frac{1}{R_{2}} + …$

$P = VI = I^{2}R = \frac{V^{2}}{R}$

$E = Pt = (VI)t$

## Electromagnetic Force and Electromagnetic Induction:

Transformer:

$\frac{V_{p}}{V_{s}} = \frac{N_{p}}{N_{s}}$

$V_{p}I_{p} = V_{s}I_{s}$

Operation of transformer:

• Alternating current supplied to primary coil
• Alternating current causes iron core to magnetise and magnetic field to change
• Hence, emf is induced in the secondary coil by electromagnetic induction due to the changing magnetic fields

Left hand rule for motor:

Right hand rule for generator/dynamo:

Right hand grip rule: (To determine direction of magnetic field/current)

Ways to increase emf in solenoid:

1. Use a stronger magnet
2. Increase the speed of moving the magnet
3. Increase the number of turns in the coil

Ways to increase emf in a.c. generator:

1. Decrease distance between magnet and coil
2. Use a stronger magnet
3. Increase frequency of rotation of the coil (Double freq. = double max. e.m.f. and halving T)
4. Increase number of turns in the coil (Double no. of turns = double max e.m.f.)

## Radioactivity & The Nuclear Atom

Half life:  (n is number of half-life)

$$\frac{N_{\text{final}}}{N_{\text{initial}}} = \left( \frac{1}{2} \right)^{n}$$

##### Mini Physics

As the Administrator of Mini Physics, I possess a BSc. (Hons) in Physics. I am committed to ensuring the accuracy and quality of the content on this site. If you encounter any inaccuracies or have suggestions for enhancements, I encourage you to contact us. Your support and feedback are invaluable to us. If you appreciate the resources available on this site, kindly consider recommending Mini Physics to your friends. Together, we can foster a community passionate about Physics and continuous learning.

This site uses Akismet to reduce spam. Learn how your comment data is processed.